Application created with 4.60 Build 20120607 crashes

Issues related to Enigma Virtual Box
Post Reply
Krisztian
Posts: 2
Joined: Mon Jun 11, 2012 12:17 pm

Application created with 4.60 Build 20120607 crashes

Post by Krisztian » Mon Jun 11, 2012 1:03 pm

Hi Enigma,

I've been following Enigma for a few months, and I'm seriously thinking about buying Enigma Protector. But I need application virtualization also.

I've tested 4.50 Build 20120424 version with one of my application, and it worked properly.
After I upgraded to 4.60 Build 20120607, the virtualized application runs only if I specify to dlls Virtualization Method: "Write to disk if not exists". But in this case it extracts the dlls to disk, and this is I want to avoid.

I made a simple test with one executable and just one dll, and on every launch I get three error messages in Windows logs:
(I tried to upload the report from Windows ReportArchive with txt extension, but your upload form refused it)

Application: Runtime_Enigma.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.IO.FileLoadException
Stack:
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
at My.MyApplication.Main(System.String[])
----------------------------------------------------------------------------------------------------------------------------
Faulting application name: Runtime_Enigma.exe, version: 11.2.11.1, time stamp: 0x4fd35749
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
Exception code: 0xe0434352
Fault offset: 0x0000b9bc
Faulting process id: 0x1944
Faulting application start time: 0x01cd47c8efcdd9eb
Faulting application path: D:\Runtime\bin\Debug\Runtime_Enigma.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 2ee26a47-b3bc-11e1-a567-e4115b3b6a2b
----------------------------------------------------------------------------------------------------------------------------
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: runtime_enigma.exe
P2: 11.2.11.1
P3: 4fd35749
P4: Microsoft.VisualBasic
P5: 10.0.0.0
P6: 4ba2183b
P7: 88
P8: 8
P9: System.IO.FileLoadException
P10:

Attached files:

These files may be available here:
C:\Users\Administrator\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_runtime_enigma.e_3c9d8a6beec4a4fb9933de05e28ca6a8d97b9d_3cfe818c

Analysis symbol:
Rechecking for solution: 0
Report Id: 2ee26a47-b3bc-11e1-a567-e4115b3b6a2b
Report Status: 0

Could you provide me any useful advice regarding this issue?

Krisztian

Enigma
Site Admin
Posts: 2521
Joined: Wed Aug 20, 2008 2:24 pm

Re: Application created with 4.60 Build 20120607 crashes

Post by Enigma » Thu Jun 14, 2012 9:18 am

Hi Krisztian,

Please update Enigma Virtual Box to the most recent version 4.70, it should be working well in your case.

Please let me know if you will have any problems!

Krisztian
Posts: 2
Joined: Mon Jun 11, 2012 12:17 pm

Re: Application created with 4.60 Build 20120607 crashes

Post by Krisztian » Fri Jun 15, 2012 1:28 pm

Hi Enigma,

Thank you for your help. It's working now.
I count on your products in the future.

Best Regards,
Krisztian

Enigma
Site Admin
Posts: 2521
Joined: Wed Aug 20, 2008 2:24 pm

Re: Application created with 4.60 Build 20120607 crashes

Post by Enigma » Mon Jun 18, 2012 8:07 am

You are welcome Krisztian.

Post Reply